Drywall calculator

Enter the wall size, subtract openings, pick the sheet size and stud spacing — get sheets, studs, screws, joint compound and tape, the way a framing crew estimates it.

isometricnot to scale
Units
Surface
Sheathing

Estimates are for planning. Always confirm quantities with your supplier before ordering.

Material scheduleSheet 01Drywall calculator

Enter the dimensions and press Calculate — the quantities appear here as a printable sheet.

📐 You need

Frequently asked questions

How many drywall sheets do I need?
Divide the net wall area (minus openings) by the sheet area and add 10% for cuts — a 4×8 sheet covers 32 sq ft. The calculator does this and rounds up to whole sheets.
How many screws per sheet of drywall?
About 32 screws per 4×8 sheet with studs at 16 in on center (roughly 1 screw per square foot). At 24 in spacing it drops to about 24 per sheet.
How much joint compound and tape per sheet?
Plan on roughly 0.13 lb of ready-mix compound per square foot (a 4.5-gal bucket of about 62 lb does about 450–500 sq ft) and about 0.37 ft of tape per square foot of drywall.
How much profile do I need for a drywall ceiling?
For a suspended single-level ceiling: furring (hat) channel 16 in (400 mm) on center, a hanger wire about every 3 ft (1 m) along each channel, perimeter wall angle around the room, and screws about every 6 in. The calculator counts channels, hanger wires, anchors and sheets from your room size. If you screw the drywall straight to ceiling joists or trusses (16 or 24 in o.c.), you only need the sheets, screws, tape and compound.

About this calculation

This calculator uses the dimensions, waste allowance and material sizes entered above. MaterialCalc is an independent project of free construction calculators. Results are planning estimates; confirm product coverage, local rules and site conditions before ordering.

More calculators

Advertising, partnerships & website development

Want builders and homeowners to see your brand, or need a website for your business? Write to us.

[email protected]